Arduino by Davis: “Re: problems with softserial and ATtiny85” plus 19 more

Re: problems with softserial and ATtiny85
Re: problems with softserial and ATtiny85
Re: ODROID
Re: serial data transfer between arduino uno and arduino micro
SRAM allocation only with include
Re: automatiseren generator
Re: Broken/unprogrammed UNO R3? =(
Re: programmare atmega 644p con convertitore arduino seriale
Re: serial data transfer between arduino uno and arduino micro
Re: Broken/unprogrammed UNO R3? =(
Building a Dedicated Bootloader Board for New ATmega328P Microcontrollers
Re: Detecting "Touch"
Re: Arduo Memory Reminder Medicine
Re: sending data between 2 arduinos using xbee
Re: Trouble with the SoftwareSerail.h in Arduino 1.03
Re: Using 4 AA Batteries To Power An Arduino Uno
EE Bookshelf: Google C++ Style Guide
Broken/unprogrammed UNO R3? =(
Re: uso particolare 7805 - data logger per auto
Re: problema con sd.h file.read()

Re: problems with softserial and ATtiny85

Posted: 08 Jan 2013 01:56 AM PST

hmmm, if the patch cables to the ATtiny where to long, (including the one to the resonator) could that have an effect?

at the moment i have ribbon cable soldered directly to an SMD 85, the ribbon cable is maybe 8cm long. at the other end they are attac...

Re: problems with softserial and ATtiny85

Posted: 08 Jan 2013 01:53 AM PST

Quote

i am not sure how i would try software serial on a 328? the board has the FTDI chip hard wired to TX and RX, at the moment i am using the board with the chip removed just as a serial converter to drive the ATtiny. if i use the original 328, won'...

Re: ODROID

Posted: 08 Jan 2013 01:51 AM PST

Pas mal ! HDMI, 4go de flash, support linux, SATA ... Bien mieux que la Rasberry à mon goût

Mais le proc c'est un A8 donc moins bien que la ODROID nan ?

Re: serial data transfer between arduino uno and arduino micro

Posted: 08 Jan 2013 01:50 AM PST

Quote from: retrolefty on Today at 04:27:13 AM

Then I'm out of ideas. Software looks pretty basic and OK.

Lefty

Try it with two Arduino Uno and it works. Does it mean that my micro is problematic or I missed ...

SRAM allocation only with include

Posted: 08 Jan 2013 01:50 AM PST

Hi,
I'm doing some stuff with an Arduino Fio. Now i have a problem that i cant understand:

Code:

// cuboManager.h

class cuboMem
{
public:
//Set RGB led to RED
cuboMem(){ analogWrite(9,255); analogWrite(10,0); analogWrite(11,0);}
};

An...

Re: automatiseren generator

Posted: 08 Jan 2013 01:29 AM PST

@rikky

Quote

<avr/pgmspace.h> blijft nog steeds zwart, en staat niet bij de libraries.

klopt, ik heb nu eindelijk door, dat je die gewoon mag weglaten bij de includes. (hij wordt sowieso geladen)

ik gebruik PROGMEM om de html pas te in het ge...

Re: Broken/unprogrammed UNO R3? =(

Posted: 08 Jan 2013 01:29 AM PST

Before mucking with bootloaders and other low-level things a sanity check is in order. Did you follow the instructions here...
http://arduino.cc/en/Guide/Windows

Re: programmare atmega 644p con convertitore arduino seriale

Posted: 08 Jan 2013 01:27 AM PST

+1 stiamo buttando abbastanza sangue (e forse anche il nome "Sanguino" non è uscito a caso

) su questa cosa, ma solo perché vogliamo arrivare ad una soluzione condivisa e certa. Aggiornati su quel thread e continua lì, questo puoi eliminar...

Re: serial data transfer between arduino uno and arduino micro

Posted: 08 Jan 2013 01:27 AM PST

Then I'm out of ideas. Software looks pretty basic and OK.

Lefty

Re: Broken/unprogrammed UNO R3? =(

Posted: 08 Jan 2013 01:26 AM PST

Hi Lefty,

Thanks for the fast reply.
I've bought it at www.iprototype.be
They are an offical reseller listed on : http://arduino.cc/en/Main/Buy
I'm pretty sure it's an offical UNO REV3.

But i've also read about using FLIP to fix the bootloader, do I n...

Building a Dedicated Bootloader Board for New ATmega328P Microcontrollers

Posted: 08 Jan 2013 01:00 AM PST

frantone

Frantone Electronics tackles Ladyada's dedicated boot loader board project.

From Fran:

The very first thing that I tried to do when I began my Digital Firefly Jar project was to burn bootloaders to newly manufactured ATmega328P microcontrollers. I knew that to reproduce my project I would need to make multiple programmed ATmega328′s and in anticipation of doing many Arduino projects I bought the chips in bulk. I knew that I would have to burn bootloaders to all of them in order to upload and use my sketches. I bought a used Arduino Duemilanove to do this, and there was a clearly laid out tutorial about burning bootloaders on a breadboard on the Arduino site. It seemed like a no brainer – an easy task – but it wasn't… It just did not work! Many attempts using the set up in the Arduino tutorial met with no success, so I went to the blogs and saw that many people were having problems doing this, and there were as many apparent solutions as there were issues. I tried every configuration from every blog I could find on the topic: adding pull up resistors, changing power supply, altering settings, changing cables, etc…. but nothing worked. The afternoon I spent trying every one of these configurations to burn a bootloader met with nothing but errors.

So I decided to go a different route and tried the dedicated bootloader board project suggested by Ladyada that used a very nifty Arduino sketch that had the Duemilanove's ATmega328 do the task, and this elegant set up works flawlessly. Success! And a really cool project too!

Frantone2

Re: Detecting "Touch"

Posted: 08 Jan 2013 12:56 AM PST

Here's a sculpture that responds to blowing...

Re: Arduo Memory Reminder Medicine

Posted: 08 Jan 2013 12:56 AM PST

Vero! Serve per forza il tristate, altrimenti i led si accendono anche quando non vengono polarizzati, visto che i pin delle linee e delle righe, con il PCF8574 potrebbero assumere solo 0V o 5V.

Aspetto allora che anche tu metta in funzi...

Re: sending data between 2 arduinos using xbee

Posted: 08 Jan 2013 12:52 AM PST

If they are working with FTDI, doesn't that mean that they are working correclty?

I have seet PAN ID of both to 2001.
also set ATDH to be the common high bits of xbee.

And ATDL is the bottom bits of the destination. Since A wants to send to B, ATDL of ...

Re: Trouble with the SoftwareSerail.h in Arduino 1.03

Posted: 08 Jan 2013 12:52 AM PST

On the Tools / Board menu, do you have the correct board select (Arduino Uno)?

Re: Using 4 AA Batteries To Power An Arduino Uno

Posted: 08 Jan 2013 12:50 AM PST

Quote from: retrolefty on Today at 03:45:49 AM

Quote from: fungus on Today at 03:41:02 AM

Perfectly clear.

All except the "4.8V battery pack". Where do you buy those...?

I l...

EE Bookshelf: Google C++ Style Guide

Posted: 08 Jan 2013 12:14 AM PST

I wasn't aware of this before, but Google has a decent style guide for C++ development. There are some interesting points in here that are very relevant to C development as well, and I always find this kind of stuff really interesting to read.

Broken/unprogrammed UNO R3? =(

Posted: 08 Jan 2013 12:23 AM PST

Hi,

Yesterday my brand new (and first) Arduino Uno R3 arrived.
But when 1 plug it in the USB, i don't get the expected blinking led.
Instead the power led and the led close to pin 13 both stay on all the time. The power led is green, the other one is y...